PAINT LINE INFO:
QR Code Link to This Post
This was a GM Approved Paint Line we purchased from Detroit MI approx 2 years ago. We are moving locations and dont have any need for this line. We are looking for someone to come, make a bid on it and be responsible for tear down and moving. However, we can tear down if required. Pictures below are what the line looked like fully assembled. We changed the configuration due to height restrictions so the oven is on ground level, not elevated.
Rapid Flex Overhead Conveyor: Operating speed 6 feet per minute
1. 3/4 HP 480V 3 Phase conveyor Drive with VFD for speed adjustment
1 Spring loaded take up
8 Horizontal turns, 36" Radius 90 degree
5 Horizontal turns, 36" Radius 180 degree
4 Vertical turns, 36" radius 30 degree
400' straight track
1 Automatic brush roller
180 Rapid Flix rigid H attachment 32" on center
180 Rapid Flex 90 degree indexing hooks
1 Lot of support steel for raised Overhead Oven
2 - Cross draft Enclosed paint booths in line with paint line
Flash Tunnel - 48" tunnel as it enters booth 1
Flash tunnels have exhaust blower of 1800CFM for removal of vapors and 2000cfm for inlet air equipped with VFD for balancing of air. 2 Personnel doors for entering flash tunnel for cleaning
Convection Oven: 40 Minutes cure time in oven
300 max temp, operating range 150-250
42'x19' in size
Oven is built to be 8' overhead wth steel structure
1,000,000 BTU Maxon Burner package, equipped with IRI gas train
1x Exhaust blower 3/4 hp 3ph 480v
1x recir blower 10HP blower
1 personnel door for cleaning
PLC control panel with touch screen for operator control. All functions of the system will be controlled at 1 location. All VFDs and oven burner controls will be housed at this panel.
1x Graco Plural Mixing Station (55G Drum/240G Tote capable.) - Solvent Borne
1x Graco Plural Mixing Station (55G Drum/240G Tote capable.) - Water Borne
(Both Graco units was rebuilt and is in new status when we bought the line)
Custom Racks and Rack carts are also available. Hundreds of racks was purchased with this line for holding of parts.
50HP Sullair Rotary Screw Compressor with matching AIR DRYER
5 Yellow Fire cabinets
22' Enclosed booth for storage of Paints, clearcoats, and etc.
Inventory Rack cage - Approx 24x24'x10'tall
MANY MANY Paint racks - Hundreds if not thousands of racks with rack carts for holding parts that go on the line.
Please email for appointment or more info