Nilfisk/Advance Aquamatic Selectric self propelled walk behind carpet extractor.
Recently refurbished with new filters, bearings, repair drain hose, and new 14/3 80ft cord.
The Aquamatic Selectric carpet extractor is fast and easy to use. It leaves carpet clean and ready for traffic in no time at all. Set you speed, squeeze the hand grips and the Selectric power scrubs and vacuums an 18in path, extracting up to 5,400 square feet an hour.
Great for large area carpet cleaning. Long hallways, large meeting rooms, large carpeted lobbies, pool hall traffic lanes, churches, nursing homes, etc...
Specifications:
Drive Motor 120v/60Hz 1 hp, 6 amp motor with belt drive to differential.
Speed Control: Touch & Go electronic control panel with LED lights gives 4 speed choices forward and reverse
Power Cable: detachable 80ft 14/3 wire
Power Draw: max amp draw is 14.5 amps
Brush Motor: 1/2 hp, 120v/60 Hz, 3.5 amp, reversing motor, totally enclosed
Brush Drive: poly-V belt
Brush: 18 inches long, 3 inch diameter, nylon bristle with chevron pattern. Turns 1200 rpm. Floatation mounted with foot operated brush-lift lever.
Solution Tank: 25 gallon
Solution Pump: Diaphragm pump, rated at .78 gpm at 60 psi max, operating rate is 30 psi
Solution Control: automatic control in forward with an electric solenoid activated by squeezing levers. Automatic shut-off in reverse. Single nozzle spray.
Vacuum Motor: 120v/60Hz, 1.5 hp, 10 amp, three stage by-pass design, 99 cfm with 2in orifice, 117in sealed waterlift.
Vacuum Shoe/Horn: 20 inch wide, stainless steel on floating mount
Cleaning Path: 18 inches
Recovery Tank: 15 gallon with float system to prevent overflow when full. Drain hose at rear of machine.
Dimensions: Length 46 inches, Width 21 inches, Height 39 inches, Weight 200 lbs
Noise Level: Only 72 decibel's
This is the 3rd one of these I have owned. Even though it's an older design it still runs rings around it's competitors.
Comparable units can run from $7000 to $10000 so this is a steal at this price!