Corvette Tach Drive Distributor. GM PN 1111196. Was used on 1965 - 1967 small block HP engines except FI and TI. Used. In original GM box. Purchased from a Chevy dealer Parts Department in the 1990s and never used. Was NOS at first installation in about 2010. I used in my 1963 Corvette for a few years. I removed it as the base plate became "wobbly" at the left side points location. It caused the plate to move up and down a small amount. About .030" by eye.
The original PN tag strip is in place. NO modifications to the distributor were made. Wires and the vacuum advance canister in good condition. No dents or damage.
I always used Accel Points and Condensers and lubricant on the cam and contact block. Wiped old grease off each point change. I used a right angle drive cable adapter (greaseable) to relieve stress on the cable. Will need a new gasket.
I did not want to take the time removing the roll pin and gear and removing the shaft, so I put my original 1963 distributor back in. The distributor has been in the box and kept inside since removal in about 2018.
Price negotiable.
FYI: I have also created a Distributor Parts Posting on Craigslist.